The clinker bulk machine is a device that automatically transports clinker (≤50mm) from the warehouse to the clinker bulk carrier. The cement clinker bulk equipment at the bottom of the warehouse is mainly composed of manual rod valves, electric fan valves, hoisting devices, telescopic discharge devices, dust collection hoses, capacitive limit switches, and electronic control systems. When the car enters the position, open the rod valve corresponding to the number of rods. Press and hold the "down button" of the control cabinet, the power of the lifting motor will be automatically disconnected when the unloading head is in place, press the "loading button" to enter the unloading state, and the auxiliary equipment will start to work accordingly, and the dust generated by the unloading will pass through the feeding The hopper enters the dust collector to purify by the telescopic dust collecting hose. When the material in the unloading head is full, the unloading head will rise while alarming, and the rising distance should be set before loading. If the ascent distance is 1 meter, adjust the time of the time relay to T=1N. The loading is always going on during the ascending process. When the blanking head is full, repeat the above actions. After reaching the full position, press the stop button to make the electric vibrator reversely brake, or close the fan valve to stop the blanking and other equipment Stop working accordingly. After parking, you can press the up button to keep the lower hopper away from the material a certain distance to ensure the movement of the transportation tool, and then aim at the second discharge station. Until the entire silo is full.